Imagine being the lone soul on a vast empty beach, surrounded by cool winds, lapping waters, and the occasional chirp of a passing seagull.  Tranquility Trios Beading Wire is a collection of colors we think represent peace of mind and clarity. This Trios Beading Wire Pack is perfect for evoking a mood through your  jewelry. 

We have a large assortment of color to choose from. We have 30 foot spools if you like a particular color. We have 10 foot spools if you want a specific color for a couple designs. We also have Trios collections. Our Trios beading wire packs are comprised of three 10 foot spools of Soft Flex Wire. Trios are themed packs of color wire. We have Trios that evoke moods. We have Trios that celebrate the color spectrum of holidays. And we have Trios created to highlight our Design Kits. Let's look at a wire that suits a calm state of mind and the peaceful, happy beader - our Tranquility Trios Beading Wire Packs.

The Tranquility  Trios collection was created to evoke a mood. Tranquility is the glassy surface of a quiet ocean. Cool and calming is the mood we think this Trios color set embodies.

We included Tanzanite, Dark Blue Lapis, and Blue Topaz Colors.

Explore color! Trios Color Wire is a lead-free beading wire for designers that want to create jewelry with color mixing in mind. Trios Color Wire Sets encapsulate the vivid palette of nature and the glamour of the fashion world. Fill your jewelry making kit with color!

Tranquility Necklace

Designer Jamie Hogsett
Skill Level Intermediate

Materials
Tranquility Trios Beading Wire Set (Tanzanite, Lapis, Blue Topaz)
2x2mm Sterling Silver Crimp Tubes - 19 pcs
3x3mm Sterling Silver Crimp Tubes - 7 pcs
5x7mm Blue  Kyanite Barrels - 24 pcs
10x12mm  Lapis Rectangles - 7 pcs
4mm Translucent Pale Blue  Czech Glass Rounds - 21 pcs
9mm Pale Blue  Czech Glass Twisted Rounds - 6 pcs

Tools
Mighty Crimping Pliers
Crimping Pliers
Cutters

Instructions

Finished Size: 29 1/2"

Step 1: Cut thirteen 4" pieces of Tanzanite wire. Repeat with the Lapis wire. Cut fifteen 4" pieces of Blue Topaz wire.

Step 2: Use 1 piece of each color wire to string one 3x3mm crimp tube. Use each wire to string one 4mm Czech glass round. Use all the wires to pass through the tube again to form a ring, trying to waste as little wire as possible. Crimp the tube using Mighty Crimping Pliers.  Click here for crimping instructions. Repeat six times to form a total of seven triple rings.

Step 3: Use 1 piece of Tanzanite wire to string one 2x2mm crimp tube and one 9mm Czech glass twisted round. Pass through one triple ring, then pass through the tube again, and crimp using Regular Crimping Pliers.

Step 4: Use 1 piece of Lapis wire to string one 2x2mm crimp tube and 4 Kyanite barrels. Pass through the previous ring, then pass through the tube again, and crimp.

Step 5: Use 1 piece of Blue Topaz wire to string one 2x2mm crimp tube and 1 Lapis rectangle. Pass through the previous ring and one triple ring, then pass through the tube again, and crimp.

Step 6: Repeat Step 3, passing through the previous triple ring. Repeat Steps 4 and 5. Repeat entire step.

Step 7: Use 1 piece of Blue Topaz wire to string one 2x2mm crimp tube and 1 Lapis rectangle. Pass through the previous triple ring, then pass back through the tube again, and crimp.

Step 8: Use 1 piece of Lapis wire to string one 2x2mm crimp tube and 4 Kyanite barrels. Pass through the previous ring, then pass through the tube again, and crimp.

Step 9: Use 1 piece of Tanzanite wire to string one 2x2mm crimp tube and one 9mm Czech glass twisted round. Pass through the previous ring and one triple ring, then pass through the tube again, and crimp.

Step 10: Repeat Steps 7-9 twice.

Step 11: Use 1 piece of Blue Topaz wire to string one 2x2mm crimp tube and 1 Lapis rectangle. Pass through the previous triple ring and the first triple ring (used in Step 3). Pass through the tube again and crimp.

Tranquility Earrings

Designer Jamie Hogsett
Skill Level Beginner

Materials
Tranquility Trios Beading Wire Set (Tanzanite, Dark Blue Lapis, Blue Topaz)
3x3mm Soft Flex Crimp Tubes - 2 pcs
Silver Filled Ear Wires - 1 pair
5x7mm Blue  Kyanite Barrels - 4 pcs
10x12mm  Lapis Rectangles - 2 pcs

Tools
Mighty Crimping Pliers
Cutters

Instructions

Step 1: Cut 6" each of Tanzanite, Lapis, and Blue Topaz wires.

Step 2: Use the Tanzanite wire to string 1 Kyanite barrel. Use the Lapis wire to string 1 Lapis rectangle. Use the Blue Topaz wire to string 1 Kyanite barrel.

Step 3: Use all three wires to string 1 crimp tube. Place the tube at the very ends of one end of the wires. Use the other end to pass back through the tube, forming a large ring of wire, then pass back through the tube again, forming a small ring above the large ring. Crimp the tube.  Click here for crimping instructions.

Step 4: Attach 1 ear wire to the small, top ring.

Step 5: Repeat Steps 1 to 4 for the second earring.

Tranquility Necklace

Designer Sara Oehler

Materials
Tranquility Trios Beading Wire Set (Tanzanite, Dark Blue Lapis, Blue Topaz)
3-strand Clasp - 1 set
2x2mm Crimp Tubes - 150 pcs
3mm Crimp Covers - 150 pcs
3x3mm Crimp Tubes - 6 pcs
4mm Crimp Covers - 6 pcs
10mm Blue  Goldstone Beads - 62 pcs
4mm Crystal  Beads - 19 pcs
6mm Crystal  Beads - 2 pcs
8mm Crystal  Beads - 7 pcs

Tools
Crimping Pliers
Mighty Crimping Pliers
Cutters
Chain Nose Pliers

Instructions

Step 1: Use 20" of Tanzanite beading wire to string one 2x2mm crimp tube. Place the crimp tube about 3” from the end of the wire and crimp, cover with a 3mm crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp using regular crimping pliers.  Click here for crimping instructions. Cover the crimp with a crimp cover.

Step 2: Continue to add beads to the wire as described in Step 1 leaving 1-1/2” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 7 beads.

Step 3: Use 20" of Tanzanite beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 4: Continue to add beads to the wire as described in Step 3 leaving 1-3/4” between each crimp. When finished, there should be about 1-1/2” of extra wire on either end of the strand and about 9 beads.

Step 5: Use 20" of Tanzanite beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-1/2” from the last crimp, cover with a crimp cover. String one 4mm crystal beads, one goldstone bead, one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 6: Continue to add beads to the wire as described in Step 5 leaving 1-1/2” between each crimp. When finished, there should be about 1-1/2” of extra wire on either end of the strand and about 8 sets beads.

Step 7: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 8: Continue to add beads to the wire as described in Step 7 leaving 1-1/2” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 9: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 2-3/4” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead, one goldstone bead, one 4mm crystal beads and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 10: String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead, one goldstone bead, one 4mm crystal beads and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 11: When finished with Steps 9-10, there should be about 3-3/4” of extra wire on either end of the strand and about 8 sets of beads.

Step 12: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 4” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 6mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 13: Continue to add beads to the wire as described in Step 12 leaving 1-3/4” between each crimp. When finished, there should be about 5” of extra wire on either end of the strand and about 7 beads.

Step 14: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 15: Continue to add beads to the wire as described in Step 14 leaving 1-1/2” between each crimp. When finished, there should be about 2-1/2” of extra wire on either end of the strand and about 9 beads.

Step 16: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 8mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 17: Continue to add beads to the wire as described in Step 16 leaving 1-3/4” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 18: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one 8mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 19: Continue to add beads to the wire as described in Step 16 leaving 1-3/4” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 20: Use all 3 strands of Tanzanite beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp using Mighty Crimping Pliers. Cover the crimp with a 4mm crimp cover. Repeat on the other side.

Step 21: Use all 3 strands of Blue Topaz beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp. Cover the crimp with a 4mm crimp cover. Repeat on the other side.

Step 22: Use all 3 strands of Dark Blue Lapis beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp. Cover the crimp with a 4mm crimp cover. Repeat on the other side.

Trios Knitted Bracelet

Designer Sara Oehler

Click here for instructions on how to make this bracelet using our Tranquility Trios Beading Wire Set.

Soft Flex Round Kumihimo Chain

Designer Sara Oehler

Click here for instructions on how to make this Kumihimo Chain using our Tranquility Trios Beading Wire Set.

Join the fun in our VIB Facebook Group today! Stay in the know. Stay up to date. From our bead shows to our video shows and sales, you can stay in touch with us. The community is full of artistic and helpful beaders and crafty people. Inspire and be inspired. Share your pictures and get the beading bug from others!

Visit the  Soft Flex Company YouTube Channel!

Blog contributor Thomas Soles loves Jazz Age writers and crunchy french fries. His favorite gemstones are Lapis and Pietersite. His favorite hobby is day dreaming. And his favorite mustache is Freddie Mercury's. As you can see, he has a healthy (or possibly unhealthy) sense of humor. You can write to him at Thomas@SoftFlexCompany.com